# Testing a New Well: What to Test and When

URL: https://springcreekdrilling.com/guide/testing-a-new-well/
Last updated: 2026-11-01

A water testing checklist for a new well in Spokane, Stevens or Lincoln County: permit tests, a first-year baseline, sampling tips and what results mean.

10 min read Updated November 1, 2026

A new well comes with two lists of water tests: the ones your county needs before it issues a building permit, and the ones that tell you what's actually in the water. The Spokane Regional Health District puts it plainly: its permit review is a one-time check of the well's production, coliform bacteria and nitrate, and testing for anything else is the property owner's responsibility ([SRHD water adequacy guide](https://assets.srhd.org/assets/media/documents/WaterAdequacyInformationalGuide.pdf)).

Here's the checklist for a new well in Spokane, Stevens or Lincoln County: what to test, when, how to take a good sample, and what to do with the results. For the bigger picture on water quality in our area, see [Well Water for Health and Wellness](https://springcreekdrilling.com/guide/well-water-for-health-and-wellness/).

## Well Water Testing Requirements in Each County

Start with the county your parcel is in.

### Spokane County

The Spokane Regional Health District (SRHD) reviews water adequacy before the county issues a building permit. Along with the well report and a pump test certification showing at least 1,440 gallons a day, it needs two lab results: coliform bacteria absent, and nitrate at or under 10 mg/L. Both samples must be collected by an SRHD-approved sampler and tested by an accredited lab. SRHD keeps a [list of certified water samplers](https://assets.srhd.org/assets/media/documents/Certified-Water-Sampler-List.pdf), which includes labs, pump companies and home inspectors.

A bad first result isn't the end. SRHD allows a coliform resample; if a clean result still can't be had, it requires an approved treatment unit and a deed notice. Nitrate over 10 mg/L can be resampled once and the two results averaged; if the average is still over, a deed notice is required.

### Stevens County

Stevens County Land Services asks for five lab results: coliform bacteria, nitrate, arsenic, lead and uranium, from a state-certified lab and less than two years old. If water quality falls short, the county can approve treatment with a recorded notice. The county's guide dates from 2018, so confirm the current list with Land Services when you apply ([Stevens County's potable water guide](https://files.municipalone.com/stevenscounty-wa/GuidetoPotableWaterRequirements1341061030082720PM.pdf)). Those five tests also cover most of the first-year baseline below. More on local rules: our [Stevens County page](https://springcreekdrilling.com/well-drilling/stevens-county/).

### Lincoln County

Lincoln County needs a septic permit before it issues a residential building permit, and the septic permit needs a well log or a letter from a public water system ([Lincoln County Building Division](https://www.lincolncountywa.com/288/Building-Division)). It doesn't list specific lab tests, but test anyway. Lincoln County Public Health's lab in Davenport offers state-certified coliform testing; its nitrate screening isn't state-certified, so get a certified nitrate result from a lab on the state's list ([Lincoln County Public Health](https://www.healthylincowa.com/215/Drinking-Water)).

## Your First-Year Baseline

Over the first year, fill in the rest of the picture. These results become the baseline you'll compare everything against later:

- **Coliform bacteria and nitrate, every year.** The state Department of Health (DOH) recommends both annually, and a nitrate retest in six months if the result is 5 mg/L or higher ([DOH](https://doh.wa.gov/community-and-environment/drinking-water/contaminants/testing-your-water)). Your permit round can count as year one.
- **Arsenic, twice.** DOH suggests testing at least twice while you own the well, once in summer and once in winter, to catch seasonal changes.
- **Uranium, at least once in Spokane and Stevens counties.** DOH lists both counties among those with potential for elevated uranium ([DOH fact sheet](https://doh.wa.gov/sites/default/files/legacy/Documents/Pubs/331-056.pdf)). The Northeast Tri-County Health District (NETCHD), which serves Stevens County, recommends retesting every three to five years, ideally April to September ([NETCHD testing guidance](https://www.netchd.org/DocumentCenter/View/1987/Water%5FTesting%5FGuidance-11262024)).
- **PFAS, on the West Plains.** Ecology's 2025 drilling advisory covers the area east and northeast of Fairchild Air Force Base, roughly between the Spokane River, Deep Creek, Four Lakes and Medical Lake ([Ecology advisory](https://ecology.wa.gov/west-plains-pfas-well-drilling-advisory)). Ecology says PFAS samples must be analyzed by an accredited lab using EPA Method 533 or 1633 ([Ecology's West Plains PFAS page](https://ecology.wa.gov/spills-cleanup/contamination-cleanup/cleanup-sites/sites-with-pfas-in-drinking-water/west-plains-pfas)). If you're near [Airway Heights](https://springcreekdrilling.com/well-drilling/airway-heights-wa/), [Medical Lake](https://springcreekdrilling.com/well-drilling/medical-lake-wa/) or [Four Lakes](https://springcreekdrilling.com/well-drilling/four-lakes-wa/), check the advisory map.
- **pH and total dissolved solids (TDS).** The EPA's yearly list for private wells adds these to coliform and nitrate ([EPA](https://www.epa.gov/privatewells/protect-your-homes-water)). They aren't health measures, but they matter for your plumbing and for choosing treatment.

One way to lay out the year: permit tests first; uranium, the first arsenic sample, pH and TDS (and PFAS, if it applies) in summer; the second arsenic sample in winter; coliform and nitrate again at the one-year mark.

## Choosing a Lab and Taking a Good Sample

Use a state-accredited drinking water lab. The Department of Health's list of nitrate and coliform labs includes three in the Spokane area that run both tests, plus Lincoln County's lab in Davenport for coliform, and it puts each test at $21 to $55 ([DOH lab list](https://doh.wa.gov/sites/default/files/2026-03/331-798.pdf)). For arsenic, uranium or PFAS, make sure the lab is accredited for that specific test; Ecology, which accredits the labs, explains [how to check](https://ecology.wa.gov/regulations-permits/permits-certifications/laboratory-accreditation/how-to-choose-an-analytical-laboratory). And skip the in-home demo: [Ecology warns](https://ecology.wa.gov/spills-cleanup/contamination-cleanup/cleanup-sites/sites-with-pfas-in-drinking-water/west-plains-pfas) that "Well sample results are not valid if they are given on-the-spot during a visit to your home from a salesperson."

Call the lab before you collect anything. NETCHD advises contacting the lab first for the correct container and collection instructions, and some labs accept only their own bottles: Lincoln County Public Health won't take samples in any other container.

The lab's instructions come first. The general steps from DOH's [sampling procedure](https://doh.wa.gov/sites/default/files/legacy/Documents/Pubs/331-222.pdf) and Lincoln County Public Health's [collection tips](https://www.healthylincowa.com/DocumentCenter/View/1957/Water-sample-collection-tips) look like this:

1. Take the aerator off the tap, along with any hose, filter or screen.
2. Run the water for about five minutes, or until its temperature holds steady.
3. Fill the bottle to the line without touching the lip of the bottle or the inside of the lid. If a coliform bottle has white powder in it, leave it in; it's a preservative.
4. Fill out the lab slip completely, including the date and time you took the sample.
5. Refrigerate the sample and get it to the lab quickly. Lincoln County Public Health and Anatek Labs in Spokane both give 30 hours from collection for coliform samples, and Anatek gives 48 hours for nitrate ([Anatek holding times](https://www.anateklabs.com/preservation-holding-time/)). Lincoln County's lab doesn't test Friday through Sunday, so sample early in the week.

If the well or plumbing has recently been chlorinated, ask the lab or your health district how long to wait before sampling for bacteria.

## Reading Your Results

Watch the units: one milligram per liter (mg/L) is 1,000 micrograms per liter, so 0.010 mg/L and 10 micrograms per liter are the same. Here's how results compare with the drinking water standards:

- **Coliform bacteria:** should be absent. If the lab also reports E. coli, take it seriously: DOH says E. coli "almost always indicates recent fecal contamination" ([DOH coliform page](https://doh.wa.gov/community-and-environment/drinking-water/contaminants/coliform)).
- **Nitrate:** the standard is 10 mg/L, measured as nitrogen ([DOH nitrate page](https://doh.wa.gov/community-and-environment/drinking-water/contaminants/nitrate)). At 5 mg/L or higher, consider a retest in six months.
- **Arsenic:** the standard is 0.010 mg/L, or 10 micrograms per liter ([EPA standards](https://www.epa.gov/ground-water-and-drinking-water/national-primary-drinking-water-regulations)).
- **Uranium:** the standard is 30 micrograms per liter (DOH fact sheet above).
- **pH and TDS:** the EPA's secondary guidelines are a pH of 6.5 to 8.5 and no more than 500 mg/L of total dissolved solids. These cover taste, odor and appearance, not health, and the EPA doesn't enforce them ([EPA secondary standards](https://www.epa.gov/sdwa/secondary-drinking-water-standards-guidance-nuisance-chemicals)).
- **PFAS:** a PFAS report lists many individual chemicals. We're not quoting numbers here; ask the lab or SRHD to walk you through it, and check Ecology's West Plains PFAS page for current guidance.

These standards are set for public water systems ([DOH private well publication](https://doh.wa.gov/sites/default/files/legacy/Documents/Pubs/331-349.pdf)); on a private well, they're your yardstick.

## If a Result Comes Back High or Positive

Don't panic, and don't ignore it:

1. **Retest.** As DOH puts it, "Taking repeat samples helps determine whether an actual problem exists in the system." Follow the lab's steps exactly.
2. **Call your health district.** DOH's advice is to contact your local health department if coliform is present or nitrate or arsenic is over the standard ([DOH 331-349](https://doh.wa.gov/sites/default/files/legacy/Documents/Pubs/331-349.pdf)). That's SRHD in Spokane County, NETCHD in Stevens County, and Lincoln County Public Health.
3. **Protect your household in the meantime.** For nitrate over 10 mg/L, DOH says not to give the water to babies under 12 months, and not to boil it, because boiling concentrates nitrate ([DOH nitrate page](https://doh.wa.gov/community-and-environment/drinking-water/contaminants/nitrate)). For arsenic over the standard, DOH suggests bottled water or another source until treatment is installed. For uranium over 30 micrograms per liter, it suggests considering a reverse osmosis system or bottled water ([DOH uranium fact sheet](https://doh.wa.gov/sites/default/files/legacy/Documents/Pubs/331-056.pdf)).
4. **Talk to a water treatment professional.** DOH says a coliform problem may call for disinfecting the well, installing treatment or repairing part of the piping.

As the Spokane and Stevens county rules above show, a high result doesn't always stop a building permit. We're happy to recommend local water treatment professionals.

## Keep Your Results With the Well Report

Your [well report](https://springcreekdrilling.com/guide/understanding-your-well-report/) records how the well was built and what it produced; your lab reports record what's in the water. Keep them together, along with:

- every lab report, with the date, the lab and the tap you sampled;
- the Ecology well ID tag number from the casing, which matches the one on the well report ([WAC 173-160-311](https://app.leg.wa.gov/WAC/default.aspx?cite=173-160-311));
- notes on anything that changed: a repair, a new pump, a flood, a change in taste or color.

Compare each new result with your baseline: a nitrate number creeping up year after year tells you more than any single test. A tidy file also helps when Stevens County wants results under two years old, or a buyer's lender asks.

## Retest After Repairs and Other Changes

A clean baseline doesn't cover you forever. DOH recommends a coliform test whenever ([DOH 331-349](https://doh.wa.gov/sites/default/files/legacy/Documents/Pubs/331-349.pdf)):

- you replace or repair any part of the well system;
- the well has been flooded;
- the water's look, taste or smell changes;
- someone in the household has an unexplained illness; or
- you hear a neighbor's well is contaminated or a neighbor's septic system is failing.

DOH also recommends a nitrate test when there's a baby under 12 months in the house, or someone who is pregnant, nursing or trying to get pregnant. For uranium, it suggests considering a retest after an earthquake or major excavation nearby, such as mining or highway construction ([DOH uranium fact sheet](https://doh.wa.gov/sites/default/files/legacy/Documents/Pubs/331-056.pdf)). After any work on the pump, pressure tank or wiring, schedule a coliform test.

## Buying or Selling a Property With a Well

NETCHD says "Most lending institutions require the seller to provide water-sampling results" when a home with a private well is bought or sold, and notes that if treatment was needed, a title notice may have been recorded on the property ([NETCHD](https://www.netchd.org/DocumentCenter/View/1987/Water%5FTesting%5FGuidance-11262024)). DOH says much the same for most counties: the county or the lender will want results showing the water is safe to drink.

If you're selling, a current coliform and nitrate result, your baseline file and the well report make that part easy. If you're buying, ask for all three, and check the title for a recorded notice. Our guide to [buying a house with a well](https://springcreekdrilling.com/guide/buying-a-house-with-a-well/) covers the flow test and the disclosure form.

## Planning a New Well?

If you're still planning, we can help with the first step: the well itself. We drill new and replacement wells across Spokane, Stevens and Lincoln counties and handle the notice of intent and the well report as part of the project. Our estimates are free: send us the address or parcel number, and we'll review the well reports filed nearby and give you a realistic idea of depth and cost. [Request your free estimate](https://springcreekdrilling.com/get-estimate/), or see [well depths by town](https://springcreekdrilling.com/well-drilling/) for a head start.
