# Water Well Drilling in Deer Park, WA

URL: https://springcreekdrilling.com/well-drilling/deer-park-wa/
Last updated: 2026-11-01

We drill residential, agricultural and commercial wells in and around Deer Park, about 20 miles north of Spokane. Here's what the state's well records show about drilling here, and what to expect for water rules and permits.

[Get a free estimate](https://springcreekdrilling.com/get-estimate/) [Call (509) 319-4713](tel:+15093194713)

A typical well around Deer Park. It's 160 ft deep. Water fills the well up to about 40 ft below the ground (the blue). Half the wells here are 101 to 223 ft deep, shown by the bracket. Based on state well records.

## Well data for Deer Park

From 2,007 water well reports filed with the Washington State Department of Ecology.

- Median well depth: 160 ft (Half are 101–223 ft deep)
- Water well reports: 2,007 (274 drilled since 2020)
- Median depth to water: 40 ft (Static water level at completion)
- Median well yield: 15 gpm (Gallons per minute at completion)

How deep wells run around Deer Park

- Under 100 ft 21% of wells (414)
- 100–199 ft 43% of wells (830)
- 200–299 ft 26% of wells (513)
- 300–399 ft 7% of wells (129)
- 400–599 ft 2% of wells (45)
- 600 ft or more 1% of wells (15)

Wells drilled since 2015 have a median depth of 160 ft, about the same as the 153 ft median for wells drilled before 2000.

Source: [Washington State Department of Ecology well reports](https://fortress.wa.gov/ecy/gispublic/DataDownload/WR%5FGEO%5FWellReports.htm), records through February 2025. Counts wells closer to Deer Park than to any other community we track, within 10 miles. Depths, water levels and yields are as the drillers reported them (427 reports list a water level and 475 list a yield). Report locations are accurate to about 40 acres. These figures describe the area, not your property: we check the reports nearest your site before we quote.

## Drilling a Well Near Deer Park

The Deer Park area is one of the busiest places for new wells in Spokane County: the state has 2,007 water well reports for the area around town, and 274 of them are for wells drilled since 2020. Most wells here are moderate in depth. The median is 160 feet, and the depth to water (the level water settles at once the well is drilled) has a median of 40 feet.

Those are area figures, and wells on nearby properties can still differ a lot. Before we give you an estimate, we look up the well reports filed for the properties closest to yours so you know what to expect before we set up the rig.

## What's Under the Ground

Deer Park sits in the Little Spokane River watershed. According to the U.S. Geological Survey, groundwater here is found in sand and gravel deposits, with scattered basalt layers in places, all resting on crystalline bedrock. The upper sand and gravel aquifer ranges from 4 to 360 feet thick and averages about 70 feet.

Where that sand and gravel holds enough water, a well can be finished in it. Where the sediments are thin or not saturated, the well has to continue into the bedrock, which USGS describes as the only source of groundwater in those spots, and the Department of Ecology notes that bedrock water in this watershed "is very limited by climate and geology." That's why some wells in the area go much deeper than the median. (Sources: [USGS Scientific Investigations Report 2013-5124](https://pubs.usgs.gov/publication/sir20135124); [Ecology's WRIA 55 water availability summary](https://apps.ecology.wa.gov/publications/documents/2011055.pdf).)

## Water Rules in the Little Spokane Watershed

Under state law ([RCW 90.44.050](https://app.leg.wa.gov/RCW/default.aspx?cite=90.44.050)), a well for household use can supply up to 5,000 gallons a day without a water right permit. The Little Spokane watershed (WRIA 55) adds a rule under the state's 2018 streamflow restoration law, [RCW 90.94.020](https://app.leg.wa.gov/RCW/default.aspx?cite=90.94.020):

- **3,000 gallons per day.** A new home's domestic use (indoor and outdoor combined) is limited to an annual average of 3,000 gallons per day, recorded on the property title.
- **$500 fee.** Spokane County collects it with the building permit, not when the well is drilled. The county also offers a stream flow mitigation certificate in place of the fee.
- **Older wells are not affected.** The rule covers new building permits and subdivisions. A well built before January 19, 2018 still counts as evidence of an adequate water supply for a building permit.

Spokane County confirms which rules apply to your parcel when you apply for the building permit. Its [building permits and water supply page](https://www.spokanecounty.gov/3991/Building-Permits-and-Water-Supply) has the details.

## Permits and Paperwork

- **Notice of intent to Ecology.** At least 72 hours before drilling starts, a notice of intent goes to the Washington State Department of Ecology, with a $200 state fee for a typical home well (casing under 12 inches).
- **Well report.** Within 30 days of finishing, we file the well report with Ecology. It records the depth, the materials we drilled through, the static water level and the tested yield, and you'll want a copy for your building permit. [How to read a well report](https://springcreekdrilling.com/guide/understanding-your-well-report/).
- **Water adequacy for your building permit.** The Spokane Regional Health District reviews the well report, a pump test certification (at least 1,440 gallons per day), and bacteria and nitrate results before the county issues the permit.
- **Setbacks.** State rules keep a new well at least 100 feet from a septic drainfield (including the reserve area) and 50 feet from a septic tank. We plan the well site around them. [Choosing a well location](https://springcreekdrilling.com/guide/choosing-the-right-location-for-your-water-well/).

## West of Town, Across the Stevens County Line

Not every property near Deer Park is in Spokane County. Of the well reports grouped with Deer Park, 176 are a few miles west and southwest of town, across the line in Stevens County. The Little Spokane watershed rule above applies on both sides of the line, with Stevens County collecting the $500 fee for permits it issues, but the building permit requirements differ. Stevens County Land Services' [guide to potable water requirements](https://files.municipalone.com/stevenscounty-wa/GuidetoPotableWaterRequirements1341061030082720PM.pdf) asks for at least 800 gallons a day for a single home, held over four hours, and results less than two years old from a state-certified lab showing no coliform bacteria and nitrate, arsenic, lead and uranium within limits, instead of the health district review described above. Your parcel number tells you which county you're in.

## Testing Your Water

The coliform and nitrate tests come first, because the building permit requires them. The Washington State Department of Health also lists Spokane County among the counties with elevated uranium in some groundwater, and the health district notes that some wells in the county have elevated uranium or arsenic. Testing for those once the well is in service is a good idea.

## Planning Your Budget

Depth is the biggest factor in what a well costs, and around Deer Park most wells land between 101 and 223 feet. Our [guide to the cost of drilling a well](https://springcreekdrilling.com/guide/the-cost-of-drilling-a-well/) breaks down the rest. For a number specific to your property, send us the address or parcel number, and we'll check the nearby well reports and give you a free estimate.

## Questions about well drilling around Deer Park

### How deep is a typical well in Deer Park, WA?

Across 1,946 well reports around Deer Park, the median depth is 160 feet and half of the wells are between 101 and 223 feet. About one in ten goes deeper than 295 feet. Your depth depends on whether the sand and gravel under your lot holds enough water or the well has to continue into bedrock, so we check the reports nearest your property before we quote.

### Is there a limit on how much water a new well near Deer Park can use?

Deer Park is in the Little Spokane watershed (WRIA 55), which falls under the state's 2018 streamflow law. For a new home that gets its building permit with a permit-exempt well, domestic use is limited to an annual average of 3,000 gallons per day, and Spokane County collects a $500 fee with the building permit (or you can buy a stream flow mitigation certificate instead). Wells built before January 19, 2018 are not affected. [Spokane County explains the options](https://www.spokanecounty.gov/3991/Building-Permits-and-Water-Supply).

### What does Spokane County need from my new well before I can build?

The Spokane Regional Health District reviews water adequacy before a building permit is issued. It needs the well report from your driller, a pump test certification showing at least 1,440 gallons per day (one gallon per minute), and water samples taken by an SRHD-approved sampler showing no coliform bacteria and nitrate no higher than 10 mg/L. [Read SRHD's water adequacy guide](https://assets.srhd.org/assets/media/documents/WaterAdequacyInformationalGuide.pdf).

### How soon can you drill a well in Deer Park?

Most of our projects are scheduled within weeks, not months, and once we're on site, most wells take one to three days. Deer Park is about 27 miles from our base in Reardan, well within our service area. [Request a free estimate](https://springcreekdrilling.com/get-estimate/) or call [(509) 319-4713](tel:+15093194713).
