# Water Well Drilling in Marshall, WA

URL: https://springcreekdrilling.com/well-drilling/marshall-wa/
Last updated: 2026-11-01

Marshall sits southwest of Spokane in the Hangman Creek watershed, about 19 miles from our base in Reardan. The state has more well reports for the area around Marshall than for any other community in Spokane County. Here's what they show and what to know before you drill.

[Get a free estimate](https://springcreekdrilling.com/get-estimate/) [Call (509) 319-4713](tel:+15093194713)

A typical well around Marshall. It's 165 ft deep. Water fills the well up to about 64 ft below the ground (the blue). Half the wells here are 120 to 260 ft deep, shown by the bracket. Based on state well records.

## Well data for Marshall

From 2,305 water well reports filed with the Washington State Department of Ecology.

- Median well depth: 165 ft (Half are 120–260 ft deep)
- Water well reports: 2,305 (142 drilled since 2020)
- Median depth to water: 64 ft (Static water level at completion)
- Median well yield: 15 gpm (Gallons per minute at completion)

How deep wells run around Marshall

- Under 100 ft 13% of wells (303)
- 100–199 ft 43% of wells (973)
- 200–299 ft 24% of wells (533)
- 300–399 ft 10% of wells (221)
- 400–599 ft 8% of wells (184)
- 600 ft or more 1% of wells (33)

Wells drilled since 2015 have a median depth of 204 ft, deeper than the 160 ft median for wells drilled before 2000.

Source: [Washington State Department of Ecology well reports](https://fortress.wa.gov/ecy/gispublic/DataDownload/WR%5FGEO%5FWellReports.htm), records through February 2025. Counts wells closer to Marshall than to any other community we track, within 10 miles. Depths, water levels and yields are as the drillers reported them (278 reports list a water level and 329 list a yield). Report locations are accurate to about 40 acres. These figures describe the area, not your property: we check the reports nearest your site before we quote.

## The Most Well Reports in Spokane County

The state has 2,305 water well reports for the area around Marshall, and 142 of them are for wells drilled since 2020. The median well is 165 feet deep, half of the wells are between 120 and 260 feet, water typically settles about 64 feet below the surface, and the median tested yield is 15 gallons per minute. With that many reports, there's usually a good record of wells near any given property.

## Shallower to the North, Deeper to the South

Depths change steadily across the area. North of town the median well is 108 feet deep, with water typically settling only about 28 feet down. East of town the median is 160 feet; southeast, 220 feet, with water about 98 feet down; and southwest, 251 feet.

Newer wells have gone somewhat deeper, and most of the recent drilling has been east and southeast of town: 165 of the 299 reports filed since 2015, with recent medians of 200 and 255 feet. Before we give you an estimate, we look up the well reports filed for the properties closest to yours.

## The Hangman Creek Watershed

The whole Marshall area is in the Hangman Creek watershed (WRIA 56). Ecology says the availability and yield of groundwater from bedrock here is "very limited," that "many areas are in decline," and that most of the watershed's water is already legally spoken for. It also lists Marshall Creek and Minnie Creek as closed to new appropriations ([Ecology's WRIA 56 summary](https://apps.ecology.wa.gov/publications/documents/2011056.pdf)).

For a household well, that's not a barrier: the watershed isn't covered by the 2018 streamflow law's fee and 3,000-gallon limit, so a well can supply up to 5,000 gallons a day for household use, plus watering up to half an acre of lawn or noncommercial garden, without a water right ([RCW 90.44.050](https://app.leg.wa.gov/RCW/default.aspx?cite=90.44.050)). Larger uses, like irrigating more than that, need a water right, and those are hard to come by here.

## Near the Edge of the West Plains PFAS Area

PFAS has been found in West Plains groundwater, primarily from Fairchild Air Force Base, Spokane International Airport and a Spokane County fire station. Ecology's April 2025 drilling advisory describes the affected area as bounded by the Spokane River, Deep Creek, [Four Lakes](https://springcreekdrilling.com/well-drilling/four-lakes-wa/) and [Medical Lake](https://springcreekdrilling.com/well-drilling/medical-lake-wa/), with boundaries that are "generalized and fluid," and Marshall is near its southern edge. Drilling "is not prohibited," but for a new well here a PFAS test with EPA Method 533 at an accredited lab is a sensible precaution ([Ecology's advisory](https://ecology.wa.gov/west-plains-pfas-well-drilling-advisory)).

## Building Permit Water Requirements

Before a building permit is issued for a home on a private well in Spokane County, the Spokane Regional Health District reviews water adequacy: the well report, a pump test certification showing at least 1,440 gallons per day, and samples taken by an SRHD-approved sampler showing no coliform bacteria and nitrate no higher than 10 mg/L ([SRHD water adequacy guide](https://assets.srhd.org/assets/media/documents/WaterAdequacyInformationalGuide.pdf)). We file the well report with Ecology within 30 days of finishing.

## Planning Your Budget

Depth is the biggest factor in what a well costs, and around Marshall the median runs from 108 feet north of town to 251 feet to the southwest. Our [guide to the cost of drilling a well](https://springcreekdrilling.com/guide/the-cost-of-drilling-a-well/) covers the rest. We also drill around [Cheney](https://springcreekdrilling.com/well-drilling/cheney-wa/) and [Spokane](https://springcreekdrilling.com/well-drilling/spokane-wa/). For a number specific to your property, send us the address or parcel number, and we'll check the nearby well reports and give you a free estimate.

## Questions about well drilling around Marshall

### How deep are wells around Marshall?

Across 2,247 well reports, more than for any other community in Spokane County, the median is 165 feet and half of the wells are between 120 and 260 feet. North of town the median is 108 feet; southwest of town it's 251 feet. We check the reports nearest your property before we quote.

### Should I test a new well near Marshall for PFAS?

It's a sensible precaution. Marshall is near the southern edge of the area covered by Ecology's West Plains drilling advisory, which Ecology says is bounded to the south by the Four Lakes area and calls "generalized and fluid." Use an accredited lab and EPA Method 533. [Read Ecology's advisory](https://ecology.wa.gov/west-plains-pfas-well-drilling-advisory).

### Can I pump water from Marshall Creek instead?

Not for a new use. Ecology lists Marshall Creek, along with Minnie Creek, as closed to new appropriations ([Ecology's WRIA 56 summary](https://apps.ecology.wa.gov/publications/documents/2011056.pdf)), and the state's permit exemption is part of its groundwater law, so it covers wells, not water taken from a creek ([RCW 90.44.050](https://app.leg.wa.gov/RCW/default.aspx?cite=90.44.050)). A permit-exempt well is the usual route.

### How soon can you drill a well near Marshall?

Marshall is about 19 miles from our base in Reardan. Most of our projects are scheduled within weeks, not months, and once we're on site, most wells take one to three days. [Request a free estimate](https://springcreekdrilling.com/get-estimate/) or call [(509) 319-4713](tel:+15093194713).
