# Water Well Drilling in Mead, WA

URL: https://springcreekdrilling.com/well-drilling/mead-wa/
Last updated: 2026-11-01

Mead sits just north of Spokane in the Little Spokane River watershed, close to where the Spokane Valley-Rathdrum Prairie aquifer reaches north from the city. Here's what the state's well records show around Mead, which water rules apply to a new well, and what the county needs before you build.

[Get a free estimate](https://springcreekdrilling.com/get-estimate/) [Call (509) 319-4713](tel:+15093194713)

A typical well around Mead. It's 200 ft deep. Water fills the well up to about 82 ft below the ground (the blue). Half the wells here are 135 to 305 ft deep, shown by the bracket. Based on state well records.

## Well data for Mead

From 718 water well reports filed with the Washington State Department of Ecology.

- Median well depth: 200 ft (Half are 135–305 ft deep)
- Water well reports: 718 (50 drilled since 2020)
- Median depth to water: 82 ft (Static water level at completion)
- Median well yield: 14 gpm (Gallons per minute at completion)

How deep wells run around Mead

- Under 100 ft 13% of wells (88)
- 100–199 ft 37% of wells (252)
- 200–299 ft 22% of wells (151)
- 300–399 ft 13% of wells (89)
- 400–599 ft 12% of wells (80)
- 600 ft or more 4% of wells (29)

Wells drilled since 2015 have a median depth of 220 ft, deeper than the 194 ft median for wells drilled before 2000.

Source: [Washington State Department of Ecology well reports](https://fortress.wa.gov/ecy/gispublic/DataDownload/WR%5FGEO%5FWellReports.htm), records through February 2025. Counts wells closer to Mead than to any other community we track, within 10 miles. Depths, water levels and yields are as the drillers reported them (96 reports list a water level and 108 list a yield). Report locations are accurate to about 40 acres. These figures describe the area, not your property: we check the reports nearest your site before we quote.

## Wells Around Mead

The state has 718 water well reports for the area around Mead, and 50 of them are for wells drilled since 2020. The median well is 200 feet deep, half of the wells are between 135 and 305 feet, water typically settles about 82 feet below the surface, and the median tested yield is 14 gallons per minute.

## Shallower to the East, Deeper to the South

East of town the median well is 155 feet deep, with a median yield of 25 gallons per minute, and northeast of town 160 feet. About 50% of the well reports are southeast of town, where the median is 209 feet, water typically settles about 52 feet down and the median yield is 10 gallons per minute. To the south, the median is 260 feet.

Recent drilling has been mostly to the southeast and east: 72 of the 101 well reports filed since 2015. Those are area medians, and neighboring properties can still differ, so before we give you an estimate we look up the well reports filed for the properties closest to yours.

## Where Two Water Rules Meet

North of Spokane, the Spokane Valley-Rathdrum Prairie aquifer reaches through the Hillyard Trough and into what the U.S. Geological Survey calls the Little Spokane River Arm ([USGS SIR 2007-5041](https://pubs.usgs.gov/sir/2007/5041/section6.html)). So in parts of north Spokane County, two state water rules overlap, and the rule for the Little Spokane watershed ([WAC 173-555-010](https://app.leg.wa.gov/WAC/default.aspx?cite=173-555-010)) splits them by source:

- **Water from the aquifer** falls under the 2015 Spokane River and aquifer rule. Water suppliers are the first choice for new uses; if one can't serve your parcel in a timely and reasonable way, a permit-exempt well needs mitigation, which Ecology's SVRP Aquifer Bank provides free of charge for a single home ([Ecology publication 15-11-011](https://apps.ecology.wa.gov/publications/documents/1511011.pdf)).
- **Water from the Little Spokane River, its tributaries or the shallow aquifer** that isn't part of the main aquifer falls under the Little Spokane rule. For a new home on a new permit-exempt well, that means an annual average of 3,000 gallons a day and a $500 fee that Spokane County collects with the building permit ([RCW 90.94.020](https://app.leg.wa.gov/RCW/default.aspx?cite=90.94.020)).

About 97% of the well reports around Mead are in the Little Spokane watershed. The building department checks whether your parcel is inside the aquifer boundary when you apply for a permit, and Spokane County's [building permits and water supply page](https://www.spokanecounty.gov/3991/Building-Permits-and-Water-Supply) explains the options. Wells drilled before January 19, 2018 aren't affected by the 3,000-gallon limit.

## Building Permit Water Requirements

Before a building permit is issued for a home on a private well in Spokane County, the Spokane Regional Health District reviews water adequacy: the well report, a pump test certification showing at least 1,440 gallons per day, and samples taken by an SRHD-approved sampler showing no coliform bacteria and nitrate no higher than 10 mg/L ([SRHD water adequacy guide](https://assets.srhd.org/assets/media/documents/WaterAdequacyInformationalGuide.pdf)). We file the well report with Ecology within 30 days of finishing. [How to read a well report](https://springcreekdrilling.com/guide/understanding-your-well-report/).

## Testing Your Water

Beyond the coliform and nitrate tests the permit requires, the health district notes that some wells in Spokane County have elevated uranium or arsenic, and the state Department of Health lists the county among those with elevated uranium in some groundwater. Testing for both once the well is in service is a good idea.

## Planning Your Budget

Depth is the biggest factor in what a well costs, and around Mead the median runs from 155 feet east of town to 260 feet to the south. Our [guide to the cost of drilling a well](https://springcreekdrilling.com/guide/the-cost-of-drilling-a-well/) covers the rest. For a number specific to your property, send us the address or parcel number, and we'll check the nearby well reports and give you a free estimate.

## Questions about well drilling around Mead

### How deep are wells around Mead?

Across 689 well reports, the median is 200 feet and half of the wells are between 135 and 305 feet. East of town the median is 155 feet; to the south it's 260 feet. We check the reports nearest your property before we quote.

### Which water rule applies to a new well near Mead?

It depends on where the water comes from. In the area where the Little Spokane rule and the Spokane Valley-Rathdrum Prairie aquifer rule overlap, new use from the aquifer falls under the aquifer rule, which requires mitigation (free for a single home through Ecology's SVRP Aquifer Bank), and new use from the Little Spokane's shallow aquifer falls under the Little Spokane rule, with its 3,000-gallon annual average and $500 fee. The building department checks whether your parcel is inside the aquifer boundary when you apply for the permit. [Ecology explains the aquifer process](https://apps.ecology.wa.gov/publications/documents/1511011.pdf).

### How much water do wells near Mead produce?

The median tested yield is 14 gallons per minute. East of town it's 25 gallons per minute, and southeast of town 10. For a building permit, the Spokane Regional Health District looks for a pump test showing at least 1,440 gallons per day, which is one gallon per minute.

### How soon can you drill a well near Mead?

Mead is about 25 miles from our base in Reardan. Most of our projects are scheduled within weeks, not months, and once we're on site, most wells take one to three days. [Request a free estimate](https://springcreekdrilling.com/get-estimate/) or call [(509) 319-4713](tel:+15093194713).
