# Water Well Drilling in Nine Mile Falls, WA

URL: https://springcreekdrilling.com/well-drilling/nine-mile-falls-wa/
Last updated: 2026-11-01

Nine Mile Falls sits on the Spokane River northwest of Spokane, about 17 miles from our base in Reardan. Two watersheds and the end of the Spokane Valley-Rathdrum Prairie aquifer meet here, so the rules for a new well depend on exactly where you are. Here's what the state's well records show and how the rules sort out.

[Get a free estimate](https://springcreekdrilling.com/get-estimate/) [Call (509) 319-4713](tel:+15093194713)

A typical well around Nine Mile Falls. It's 200 ft deep. Water fills the well up to about 145 ft below the ground (the blue). Half the wells here are 100 to 296 ft deep, shown by the bracket. Based on state well records.

## Well data for Nine Mile Falls

From 850 water well reports filed with the Washington State Department of Ecology.

- Median well depth: 200 ft (Half are 100–296 ft deep)
- Water well reports: 850 (53 drilled since 2020)
- Median depth to water: 145 ft (Static water level at completion)
- Median well yield: 15 gpm (Gallons per minute at completion)

How deep wells run around Nine Mile Falls

- Under 100 ft 25% of wells (201)
- 100–199 ft 25% of wells (204)
- 200–299 ft 25% of wells (207)
- 300–399 ft 11% of wells (87)
- 400–599 ft 11% of wells (89)
- 600 ft or more 3% of wells (27)

Wells drilled since 2015 have a median depth of 255 ft, deeper than the 154 ft median for wells drilled before 2000.

Source: [Washington State Department of Ecology well reports](https://fortress.wa.gov/ecy/gispublic/DataDownload/WR%5FGEO%5FWellReports.htm), records through February 2025. Counts wells closer to Nine Mile Falls than to any other community we track, within 10 miles. Depths, water levels and yields are as the drillers reported them (88 reports list a water level and 117 list a yield). Report locations are accurate to about 40 acres. These figures describe the area, not your property: we check the reports nearest your site before we quote.

## Wells Around Nine Mile Falls

The state has 850 water well reports for the area around Nine Mile Falls, and 53 of them are for wells drilled since 2020. The median well is 200 feet deep, and water levels run deep: the median depth to water, the level it settles at once the well is drilled, is 145 feet, one of the deepest of the Spokane County communities we track. The median tested yield is 15 gallons per minute.

## Two Watersheds, Different Depths

About 83% of the well reports are in the Lower Spokane watershed (WRIA 54), where the median well is 154 feet deep, and about 18% are in the Little Spokane watershed (WRIA 55), where it's 260 feet. By direction, the median is 195 feet west of town, 220 feet to the southwest, 268 feet to the south and 253 feet to the east.

Newer wells have gone deeper, and most of the recent drilling has been to the southwest and west: 68 of the 113 reports filed since 2015. Southwest of town, water typically settles about 176 feet below the surface. Before we give you an estimate, we look up the well reports filed for the properties closest to yours.

## Three Sets of Water Rules

- **Lower Spokane watershed.** Outside the aquifer, the standard permit exemption applies: up to 5,000 gallons a day for household use, plus watering up to half an acre of lawn or noncommercial garden, without a water right permit ([RCW 90.44.050](https://app.leg.wa.gov/RCW/default.aspx?cite=90.44.050)), and no streamflow fee.
- **Little Spokane watershed.** For a new home on a new permit-exempt well, the state's 2018 streamflow law limits indoor and outdoor use combined to an annual average of 3,000 gallons a day, and Spokane County collects a $500 fee with the building permit ([RCW 90.94.020](https://app.leg.wa.gov/RCW/default.aspx?cite=90.94.020)). Wells drilled before January 19, 2018 aren't affected.
- **The aquifer.** The U.S. Geological Survey describes the Spokane Valley-Rathdrum Prairie aquifer as extending west from Idaho "to near Nine Mile Falls northwest of Spokane" ([USGS SIR 2007-5041](https://pubs.usgs.gov/sir/2007/5041/section2.html)). New use of aquifer water falls under the state's 2015 rule ([WAC 173-557](https://app.leg.wa.gov/WAC/default.aspx?cite=173-557&full=true)): water suppliers are the first choice, and if one can't serve your parcel in a timely and reasonable way, a permit-exempt well needs mitigation, which Ecology's SVRP Aquifer Bank provides free of charge for a single home ([Ecology publication 15-11-011](https://apps.ecology.wa.gov/publications/documents/1511011.pdf)).

You don't have to work this out alone: the building department checks whether your parcel is inside the aquifer boundary when you apply for a permit, and Spokane County's [building permits and water supply page](https://www.spokanecounty.gov/3991/Building-Permits-and-Water-Supply) covers the options.

## Building Permit Water Requirements

Before a building permit is issued for a home on a private well in Spokane County, the Spokane Regional Health District reviews water adequacy: the well report, a pump test certification showing at least 1,440 gallons per day, and samples taken by an SRHD-approved sampler showing no coliform bacteria and nitrate no higher than 10 mg/L ([SRHD water adequacy guide](https://assets.srhd.org/assets/media/documents/WaterAdequacyInformationalGuide.pdf)). We file the well report with Ecology within 30 days of finishing. [How to read a well report](https://springcreekdrilling.com/guide/understanding-your-well-report/).

## Testing Your Water

Start with the coliform and nitrate tests the permit requires, and consider uranium and arsenic, which the health district notes are elevated in some Spokane County wells. Ecology's West Plains PFAS drilling advisory names Deep Creek as the northern boundary of the area of known and suspected contamination, so if your property is south of Deep Creek, toward [Airway Heights](https://springcreekdrilling.com/well-drilling/airway-heights-wa/), add a PFAS test with EPA Method 533 at an accredited lab ([Ecology's advisory](https://ecology.wa.gov/west-plains-pfas-well-drilling-advisory)).

## Planning Your Budget

Depth is the biggest factor in what a well costs, and around Nine Mile Falls half of the wells land between 100 and 296 feet. Deep water levels also mean a deeper pump setting, which adds to the cost of the pump system. Our [guide to the cost of drilling a well](https://springcreekdrilling.com/guide/the-cost-of-drilling-a-well/) covers the rest. For a number specific to your property, send us the address or parcel number, and we'll check the nearby well reports and give you a free estimate.

## Questions about well drilling around Nine Mile Falls

### Which water rules apply to a new well near Nine Mile Falls?

It depends on where your parcel is. In the Lower Spokane watershed, the standard permit exemption applies: up to 5,000 gallons a day for household use, with no streamflow fee. In the Little Spokane watershed, a new home's use is limited to an annual average of 3,000 gallons a day and Spokane County collects a $500 fee with the building permit. And where a well would draw from the Spokane Valley-Rathdrum Prairie aquifer, water suppliers come first and a permit-exempt well needs mitigation, which Ecology provides free for a single home. The building department confirms which applies when you apply. [Ecology on the aquifer rule](https://apps.ecology.wa.gov/publications/documents/1511011.pdf).

### How deep are wells around Nine Mile Falls?

Across 815 well reports, the median is 200 feet and half of the wells are between 100 and 296 feet. Wells in the Lower Spokane watershed have a median of 154 feet, and wells in the Little Spokane watershed 260 feet. Water levels run deep, with a median of 145 feet below the surface. We check the reports nearest your property before we quote.

### Why do newer wells around Nine Mile Falls go deeper?

The records show where they are: 42 of the 113 well reports filed since 2015 are southwest of town and 26 are west of town. Southwest of town the median well is 220 feet deep and water typically settles about 176 feet below the surface.

### How soon can you drill a well near Nine Mile Falls?

Nine Mile Falls is about 17 miles from our base in Reardan. Most of our projects are scheduled within weeks, not months, and once we're on site, most wells take one to three days. [Request a free estimate](https://springcreekdrilling.com/get-estimate/) or call [(509) 319-4713](tel:+15093194713).
