# Water Well Drilling in Spangle, WA

URL: https://springcreekdrilling.com/well-drilling/spangle-wa/
Last updated: 2026-11-01

Spangle sits on US 195 south of Spokane, about 29 miles from our base in Reardan. Wells here run deeper than the county median, and the water sits further down than almost anywhere else in Spokane County. Here's what the state's records show and what to know before you drill.

[Get a free estimate](https://springcreekdrilling.com/get-estimate/) [Call (509) 319-4713](tel:+15093194713)

A typical well around Spangle. It's 240 ft deep. Water fills the well up to about 150 ft below the ground (the blue). Half the wells here are 140 to 320 ft deep, shown by the bracket. Based on state well records.

## Well data for Spangle

From 626 water well reports filed with the Washington State Department of Ecology.

- Median well depth: 240 ft (Half are 140–320 ft deep)
- Water well reports: 626 (65 drilled since 2020)
- Median depth to water: 150 ft (Static water level at completion)
- Median well yield: 20 gpm (Gallons per minute at completion)

How deep wells run around Spangle

- Under 100 ft 8% of wells (48)
- 100–199 ft 30% of wells (185)
- 200–299 ft 26% of wells (165)
- 300–399 ft 27% of wells (169)
- 400–599 ft 9% of wells (55)
- 600 ft or more 0% of wells (3)

Wells drilled since 2015 have a median depth of 280 ft, deeper than the 214 ft median for wells drilled before 2000.

Source: [Washington State Department of Ecology well reports](https://fortress.wa.gov/ecy/gispublic/DataDownload/WR%5FGEO%5FWellReports.htm), records through February 2025. Counts wells closer to Spangle than to any other community we track, within 10 miles. Depths, water levels and yields are as the drillers reported them (101 reports list a water level and 127 list a yield). Report locations are accurate to about 40 acres. These figures describe the area, not your property: we check the reports nearest your site before we quote.

## Deep Wells, Deeper Water

The state has 626 water well reports for the area around Spangle, and 65 of them are for wells drilled since 2020. The median well is 240 feet deep and half of the wells are between 140 and 320 feet. The water level stands out: it typically settles about 150 feet below the surface, one of the deepest of the Spokane County communities we track. The median tested yield is 20 gallons per minute.

## Where the Wells Are

Most of the recent drilling has been north of town: 63 of the 116 reports filed since 2015. Wells there have a median depth of 250 feet, recent ones 280 feet, and water typically settles about 146 feet down. Northwest of town the median is 220 feet, with water about 121 feet down and a median yield of 25 gallons per minute. To the northeast and west, wells go deeper, with medians of 295 and 278 feet.

Those are area medians, and neighboring properties can differ. Before we give you an estimate, we look up the well reports filed for the properties closest to yours.

## Water Rules

About 83% of the well reports around Spangle are in the Hangman Creek watershed (WRIA 56), with a median depth of 236 feet, and about 17% are in the Palouse watershed (WRIA 34), with a median of 260 feet. Neither falls under the 2018 streamflow law's fee and 3,000-gallon limit, so a household well can supply up to 5,000 gallons a day, plus watering up to half an acre of lawn or noncommercial garden, without a water right ([RCW 90.44.050](https://app.leg.wa.gov/RCW/default.aspx?cite=90.44.050)). Stock watering is exempt too.

Larger uses need a water right, and Ecology says groundwater from bedrock in the Hangman watershed is "very limited" and that "many areas are in decline, meaning little if any water is available for new consumptive appropriations" ([Ecology's WRIA 56 summary](https://apps.ecology.wa.gov/publications/documents/2011056.pdf)). [More on farm wells and water rights](https://springcreekdrilling.com/agricultural-well-drilling/).

## Building Permit Water Requirements

Before a building permit is issued for a home on a private well in Spokane County, the Spokane Regional Health District reviews water adequacy: the well report, a pump test certification showing at least 1,440 gallons per day, and samples taken by an SRHD-approved sampler showing no coliform bacteria and nitrate no higher than 10 mg/L ([SRHD water adequacy guide](https://assets.srhd.org/assets/media/documents/WaterAdequacyInformationalGuide.pdf)). The health district also notes that some wells in the county have elevated uranium or arsenic, so those are worth testing once the well is in service.

## Planning Your Budget

Depth is the biggest factor in what a well costs, and around Spangle half of the wells land between 140 and 320 feet. A deep water level also means a deeper pump setting, which adds to the cost of the pump system. Our [guide to the cost of drilling a well](https://springcreekdrilling.com/guide/the-cost-of-drilling-a-well/) covers the rest. We also drill around [Valleyford](https://springcreekdrilling.com/well-drilling/valleyford-wa/) and [Cheney](https://springcreekdrilling.com/well-drilling/cheney-wa/). For a number specific to your property, send us the address or parcel number, and we'll check the nearby well reports and give you a free estimate.

## Questions about well drilling around Spangle

### How deep are wells around Spangle?

Across 625 well reports, the median is 240 feet and half of the wells are between 140 and 320 feet. Wells drilled since 2015 have a median of 280 feet. We check the reports nearest your property before we quote.

### How far down is the water around Spangle?

Further than in most of Spokane County. Across the reports that list it, water typically settles about 150 feet below the surface once a well is drilled, one of the deepest levels in the county. That affects the pump setting as well as the well depth, so it's worth knowing before you budget.

### Where are new wells being drilled around Spangle?

Mostly north of town: 63 of the 116 well reports filed since 2015. Wells there have a median depth of 250 feet, and recent ones 280 feet, with water about 146 feet down.

### How soon can you drill a well near Spangle?

Spangle is about 29 miles from our base in Reardan. Most of our projects are scheduled within weeks, not months, and once we're on site, most wells take one to three days. [Request a free estimate](https://springcreekdrilling.com/get-estimate/) or call [(509) 319-4713](tel:+15093194713).
