# Water Well Drilling in Spokane Valley, WA

URL: https://springcreekdrilling.com/well-drilling/spokane-valley-wa/
Last updated: 2026-11-01

Spokane Valley sits over the Spokane Valley-Rathdrum Prairie aquifer, and the rules that protect it decide whether a new well is an option. Here's how those rules work, what the state's well records show around the valley, and why newer wells here tend to go deep.

[Get a free estimate](https://springcreekdrilling.com/get-estimate/) [Call (509) 319-4713](tel:+15093194713)

A typical well around Spokane Valley. It's 195 ft deep. Water fills the well up to about 92 ft below the ground (the blue). Half the wells here are 103 to 400 ft deep, shown by the bracket. Based on state well records.

## Well data for Spokane Valley

From 872 water well reports filed with the Washington State Department of Ecology.

- Median well depth: 195 ft (Half are 103–400 ft deep)
- Water well reports: 872 (26 drilled since 2020)
- Median depth to water: 92 ft (Static water level at completion)
- Median well yield: 7 gpm (Gallons per minute at completion)

How deep wells run around Spokane Valley

- Under 100 ft 22% of wells (180)
- 100–199 ft 28% of wells (229)
- 200–299 ft 13% of wells (104)
- 300–399 ft 10% of wells (83)
- 400–599 ft 18% of wells (146)
- 600 ft or more 9% of wells (69)

Wells drilled since 2015 have a median depth of 400 ft, deeper than the 174 ft median for wells drilled before 2000.

Source: [Washington State Department of Ecology well reports](https://fortress.wa.gov/ecy/gispublic/DataDownload/WR%5FGEO%5FWellReports.htm), records through February 2025. Counts wells closer to Spokane Valley than to any other community we track, within 10 miles. Depths, water levels and yields are as the drillers reported them (68 reports list a water level and 78 list a yield). Report locations are accurate to about 40 acres. These figures describe the area, not your property: we check the reports nearest your site before we quote.

## Wells Around Spokane Valley

The state has 872 water well reports for the area around Spokane Valley, but only 26 of them are for wells drilled since 2020. That fits how the valley gets its water: the Department of Ecology notes that "the majority of the region is served by existing municipal water suppliers," so private wells are mostly for properties those suppliers don't reach.

Depths here vary more than almost anywhere else in Spokane County. The median well is 195 feet deep, but half of the wells are between 103 and 400 feet, and one in ten goes deeper than 560 feet.

## The Aquifer and the Ground Around It

The U.S. Geological Survey describes the Spokane Valley-Rathdrum Prairie aquifer as "thick layers of coarse-grained sediments" deposited "during a series of outburst floods," in a valley "surrounded by bedrock highlands." It was designated a sole source aquifer by the EPA in 1978 and supplies drinking water for more than 500,000 people ([USGS SIR 2007-5041](https://pubs.usgs.gov/sir/2007/5041/section2.html)).

The well records show how much location matters. West of the city center, the median well is 90 feet deep. Southwest of the city center, the median is 400 feet, water typically settles about 140 feet below the surface, and the median tested yield is just 6 gallons per minute. That's also where most of the recent drilling has been: 33 of the 67 well reports filed since 2015 are southwest of the city center, and those wells have a median depth of 520 feet.

## Can You Drill a Well in Spokane Valley?

Since February 27, 2015, a state rule for the Spokane River and the aquifer ([WAC 173-557](https://app.leg.wa.gov/WAC/default.aspx?cite=173-557&full=true)) has covered every new use of its water. Ecology's guide to permit-exempt wells over the aquifer ([publication 15-11-011](https://apps.ecology.wa.gov/publications/documents/1511011.pdf)) lays out how it works:

1. **It starts with the building permit.** The building department checks whether your parcel is inside the aquifer boundary and tells you your water supply options.
2. **Ask the water supplier first.** If a public water supplier serves your area and can provide water "in a reasonable and timely manner," you connect, and the rule doesn't affect you.
3. **If it can't, or there's no supplier, request mitigation water.** A letter to Ecology's Eastern Region office explains why (the supplier should write it if possible) and includes your parcel details and the well log if you have one. If the SVRP Aquifer Bank has water and the use fits, Ecology issues a release letter that reserves water for your project for up to three years. The bank covers permit-exempt uses of a single home free of charge.
4. **Get the certificate before move-in.** Before the building department issues a certificate of occupancy, you request a Certificate of Mitigation from Ecology, which is recorded with the County Auditor for a recording fee. No flow meter is currently required.

The north end of the area is different again: about 15% of the well reports around Spokane Valley are in the Little Spokane watershed, where the state's 2018 streamflow law limits a new home's domestic use to an annual average of 3,000 gallons a day and Spokane County collects a $500 fee with the building permit ([RCW 90.94.020](https://app.leg.wa.gov/RCW/default.aspx?cite=90.94.020)). The county confirms which rules apply to your parcel on its [building permits and water supply page](https://www.spokanecounty.gov/3991/Building-Permits-and-Water-Supply).

## Building Permit Water Requirements

Once the well is in, the Spokane Regional Health District reviews water adequacy before the building permit is issued: the well report, a pump test certification showing at least 1,440 gallons per day, and samples taken by an SRHD-approved sampler showing no coliform bacteria and nitrate no higher than 10 mg/L ([SRHD water adequacy guide](https://assets.srhd.org/assets/media/documents/WaterAdequacyInformationalGuide.pdf)). We file the well report with Ecology within 30 days of finishing.

## Testing Your Water

Beyond the coliform and nitrate tests the permit requires, the health district notes that some wells in Spokane County have elevated uranium or arsenic, and the state Department of Health lists the county among those with elevated uranium in some groundwater. Testing for both once the well is in service is a good idea.

## Planning Your Budget

Depth is the biggest factor in what a well costs, and in Spokane Valley it can range from around 90 feet to well past 400. Our [guide to the cost of drilling a well](https://springcreekdrilling.com/guide/the-cost-of-drilling-a-well/) covers the rest. Spokane Valley is about 30 miles from our base in Reardan, and nearby we also drill around [Spokane](https://springcreekdrilling.com/well-drilling/spokane-wa/) and [Mead](https://springcreekdrilling.com/well-drilling/mead-wa/). For a number specific to your property, send us the address or parcel number, and we'll check the nearby well reports and give you a free estimate.

## Questions about well drilling around Spokane Valley

### Can I drill a private well in Spokane Valley?

Yes, if a water supplier can't serve your property. Under the state's 2015 rule for the Spokane Valley-Rathdrum Prairie aquifer, existing water suppliers are the first choice for new uses. If yours can't serve you "in a timely and reasonable manner," you can use a permit-exempt well, but its use has to be mitigated. For a single home, Ecology's SVRP Aquifer Bank provides that mitigation free of charge. [Ecology explains the steps](https://apps.ecology.wa.gov/publications/documents/1511011.pdf).

### How deep are wells in Spokane Valley?

Across 811 well reports, the median is 195 feet, but half of the wells are anywhere from 103 to 400 feet deep. West of the city center the median is 90 feet; to the southwest it's 400 feet. We check the reports nearest your property before we quote.

### Why do newer wells around Spokane Valley go so deep?

Wells drilled since 2015 have a median depth of 400 feet, compared with 174 feet for wells drilled before 2000. The records show where those newer wells are: 33 of the 67 reports filed since 2015 are southwest of the city center, where the median is 400 feet and wells yield a median of 6 gallons per minute.

### Does the cost of mitigation add to my well?

The mitigation water itself is free through Ecology's SVRP Aquifer Bank for permit-exempt uses of a single home. The Certificate of Mitigation is recorded with the County Auditor, so you pay the auditor's recording fee, which is set by state law. The bank can't be used for a subdivision or for uses large enough to need a water right.
