# Water Well Drilling in Wilbur, WA

URL: https://springcreekdrilling.com/well-drilling/wilbur-wa/
Last updated: 2026-11-01

Wilbur sits on US 2 in western Lincoln County, about 39 miles from our base in Reardan. Wells here run deeper than in most of the county, down through layer after layer of basalt. Here's what the state's records show and what to know before you drill.

[Get a free estimate](https://springcreekdrilling.com/get-estimate/) [Call (509) 319-4713](tel:+15093194713)

A typical well around Wilbur. It's 240 ft deep, and the blue is the water in it. There aren't enough records here to say how full wells get. Half the wells here are 154 to 390 ft deep, shown by the bracket. Based on state well records.

## Well data for Wilbur

From 145 water well reports filed with the Washington State Department of Ecology.

- Median well depth: 240 ft (Half are 154–390 ft deep)
- Water well reports: 145 (6 drilled since 2020)

How deep wells run around Wilbur

- Under 100 ft 14% of wells (20)
- 100–199 ft 21% of wells (29)
- 200–299 ft 22% of wells (31)
- 300–399 ft 17% of wells (24)
- 400–599 ft 15% of wells (21)
- 600 ft or more 10% of wells (14)

Source: [Washington State Department of Ecology well reports](https://fortress.wa.gov/ecy/gispublic/DataDownload/WR%5FGEO%5FWellReports.htm), records through February 2025. Counts wells closer to Wilbur than to any other community we track, within 10 miles. Depths, water levels and yields are as the drillers reported them. Report locations are accurate to about 40 acres. These figures describe the area, not your property: we check the reports nearest your site before we quote.

## Some of the Deepest Wells in Lincoln County

The state has 145 water well reports for the area around Wilbur. The median well is 240 feet deep, compared with 233 feet for Lincoln County as a whole, and half of the wells are between 154 and 390 feet. The deep end is deep: about 10% of the wells go past 600 feet, and one in ten goes deeper than 590 feet.

North of town the median is 305 feet, and south of town 335 feet. Only 6 of the reports are for wells drilled since 2020, so the records are thinner here than around the bigger towns, and the reports for the properties nearest yours matter even more. We look them up before we quote.

## Drilling Through Basalt

Wilbur sits on the Columbia Plateau, where, according to the U.S. Geological Survey, "the primary aquifers within the Columbia Plateau occur in basalts of the Columbia River Basalt Group." More than 350 separate lava flows make up those basalts, each from 10 to more than 300 feet thick, with layers of sediment in places between them ([USGS Fact Sheet 2015-3063](https://pubs.usgs.gov/fs/2015/3063/)). How deep a well goes depends on where it finds enough water in that stack, and around Wilbur the answer varies a lot: the shallowest quarter of the wells stop by 154 feet, while the deepest tenth go past 590.

## Water Rules Around Wilbur

About 92% of the well reports around Wilbur are in the Upper Crab-Wilson watershed (WRIA 43), with a median depth of 235 feet; the rest are in the Lower Lake Roosevelt watershed to the north. Neither falls under the 2018 streamflow law's fee and 3,000-gallon limit, so a household well can supply up to 5,000 gallons a day, plus watering up to half an acre of lawn or noncommercial garden, without a water right ([RCW 90.44.050](https://app.leg.wa.gov/RCW/default.aspx?cite=90.44.050)). Stock watering is exempt too.

Water for larger uses is scarce. Ecology notes that because of extensive bedrock, only a fraction of the precipitation in the Upper Crab-Wilson watershed becomes groundwater, and that most of its water is already legally spoken for ([Ecology's WRIA 43 summary](https://apps.ecology.wa.gov/publications/documents/2011043.pdf)). The Odessa Subarea, where groundwater levels are declining and new water rights aren't available, is in the southwestern part of the same watershed, but its boundaries stop several townships south of Wilbur ([WAC 173-128A-040](https://app.leg.wa.gov/WAC/default.aspx?cite=173-128A-040)). [More on agricultural wells and water rights](https://springcreekdrilling.com/agricultural-well-drilling/).

## What Lincoln County Needs Before You Build

Lincoln County asks for proof of potable water, such as a well log, for the septic permit, and a septic permit before it issues a residential building permit ([Lincoln County's building requirements](https://www.lincolncountywa.com/288/Building-Division)). Lincoln County Public Health doesn't regulate wells that serve a single home, but it offers water testing ([Lincoln County Public Health](https://www.healthylincowa.com/215/Drinking-Water)). We file the well report with Ecology within 30 days of finishing, so you'll have the log for the septic permit. Test the new well for coliform bacteria and nitrate, and repeat the tests regularly.

## Planning Your Budget

Depth is the biggest factor in what a well costs, and around Wilbur the range is wide: half of the wells land between 154 and 390 feet, and some go much deeper. A deep well also means a deeper pump setting, which adds to the cost of the pump system. Our [guide to the cost of drilling a well](https://springcreekdrilling.com/guide/the-cost-of-drilling-a-well/) covers the rest. We also drill around [Creston](https://springcreekdrilling.com/well-drilling/creston-wa/), about 9 miles east, and [Davenport](https://springcreekdrilling.com/well-drilling/davenport-wa/). For a number specific to your property, send us the address or parcel number, and we'll check the nearby well reports and give you a free estimate.

## Questions about well drilling around Wilbur

### How deep are wells around Wilbur?

Across 139 well reports, the median is 240 feet, one of the deepest in Lincoln County, and half of the wells are between 154 and 390 feet. About 10% go deeper than 600 feet. We check the reports nearest your property before we quote.

### Is Wilbur in the Odessa Subarea?

No. The Odessa Subarea, where the state manages a declining aquifer, is defined township by township in state rules, and it reaches no farther north than Township 23 North. Wilbur is several townships north of that. [WAC 173-128A-040](https://app.leg.wa.gov/WAC/default.aspx?cite=173-128A-040).

### Is there a $500 fee or 3,000-gallon limit for a new well near Wilbur?

No. Those come from the 2018 streamflow law and apply only in certain watersheds, such as the Little Spokane and the Colville. Around Wilbur, the standard permit exemption applies: up to 5,000 gallons a day for household use, plus watering up to half an acre of lawn or noncommercial garden, without a water right.

### How soon can you drill a well near Wilbur?

Wilbur is about 39 miles from our base in Reardan, within our service area. Most of our projects are scheduled within weeks, not months, and once we're on site, most wells take one to three days. [Request a free estimate](https://springcreekdrilling.com/get-estimate/) or call [(509) 319-4713](tel:+15093194713).
