Skip to main content

Our well drilling service area

We drill wells across Spokane, Stevens and Lincoln counties from our base in Reardan, and travel up to 90 miles out. Find your town to see how deep wells run there, from 40,024 well reports filed with the state.

Service area map Spokane, Stevens and Lincoln Counties in Eastern Washington, with a dot for each community we drill in, shaded by median well depth. The town lists on this page give the same numbers. IDAHO CANADA Spokane Deer Park Cheney Colville Kettle Falls Chewelah Davenport Reardan
Median well depth Under 150 ft 150–199 ft 200–249 ft 250–299 ft 300 ft or more Our base in Reardan

Well depths by county

From the 40,024 water well reports filed with the Washington State Department of Ecology.

  • Spokane County

    200 ft median depth

    Half are between
    120–320 ft
    Water fills to about
    65 ft below ground
    Median tested yield
    13 gpm
    Well reports
    25,508
  • Stevens County

    194 ft median depth

    Half are between
    100–317 ft
    Water fills to about
    60 ft below ground
    Median tested yield
    7 gpm
    Well reports
    11,768
  • Lincoln County

    233 ft median depth

    Half are between
    140–385 ft
    Water fills to about
    100 ft below ground
    Median tested yield
    20 gpm
    Well reports
    2,748

Spokane County

Communities we drill in, with the most well reports first.

Community Median depth Depth to water
Marshall 165 ft 64 ft
Deer Park 160 ft 40 ft
Chattaroy 190 ft 100 ft
Elk 180 ft 55 ft
Valleyford 225 ft 90 ft
Spokane 175 ft 86 ft
Airway Heights 180 ft 163 ft
Spokane Valley 195 ft 92 ft
Nine Mile Falls 200 ft 145 ft
Cheney 180 ft 60 ft
Mica 400 ft 95 ft
Mead 200 ft 82 ft
Medical Lake 130 ft 49 ft
Spangle 240 ft 150 ft
Newman Lake 360 ft 95 ft
Colbert 187 ft Too few reports
Four Lakes 165 ft 42 ft
Otis Orchards 250 ft 112 ft
Fairfield 238 ft Too few reports

Stevens County

Communities we drill in, with the most well reports first.

Community Median depth Depth to water
Colville 171 ft 50 ft
Clayton 160 ft 35 ft
Springdale 149 ft 71 ft
Tumtum 220 ft 70 ft
Northport 180 ft 65 ft
Valley 180 ft 64 ft
Chewelah 180 ft 74 ft
Loon Lake 198 ft 103 ft
Kettle Falls 245 ft 70 ft
Ford 130 ft 52 ft
Addy 200 ft 43 ft
Hunters 270 ft Too few reports

Lincoln County

Communities we drill in, with the most well reports first.

Community Median depth Depth to water
Edwall 147 ft 44 ft
Davenport 159 ft 40 ft
Wilbur 240 ft Too few reports
Reardan 180 ft 32 ft
Sprague 160 ft Too few reports
Creston 180 ft Too few reports
Odessa 368 ft Too few reports
Harrington 143 ft Too few reports

About these numbers

Every well drilled in Washington gets a well report, filed with the Department of Ecology by the licensed driller. We grouped the reports for Spokane, Stevens and Lincoln counties by the nearest community (within 10 miles), so each town's numbers come from the wells around it. Depth to water is how far below the ground the water fills the well when nothing is pumping (the static water level on the report); "Too few reports" means not enough reports list it.

Depths can vary a lot between neighboring properties, so these numbers are a starting point, not a quote. Send us the address or parcel number. We'll check the well reports nearest your land and give you a free estimate. Our guides explain how to read a well report and why depth varies so much here.

Source: Washington State Department of Ecology well reports, records through February 2025.