Wells Around Mead
The state has 718 water well reports for the area around Mead, and 50 of them are for wells drilled since 2020. The median well is 200 feet deep, half of the wells are between 135 and 305 feet, water typically settles about 82 feet below the surface, and the median tested yield is 14 gallons per minute.
Shallower to the East, Deeper to the South
East of town the median well is 155 feet deep, with a median yield of 25 gallons per minute, and northeast of town 160 feet. About 50% of the well reports are southeast of town, where the median is 209 feet, water typically settles about 52 feet down and the median yield is 10 gallons per minute. To the south, the median is 260 feet.
Recent drilling has been mostly to the southeast and east: 72 of the 101 well reports filed since 2015. Those are area medians, and neighboring properties can still differ, so before we give you an estimate we look up the well reports filed for the properties closest to yours.
Where Two Water Rules Meet
North of Spokane, the Spokane Valley-Rathdrum Prairie aquifer reaches through the Hillyard Trough and into what the U.S. Geological Survey calls the Little Spokane River Arm (USGS SIR 2007-5041). So in parts of north Spokane County, two state water rules overlap, and the rule for the Little Spokane watershed (WAC 173-555-010) splits them by source:
- Water from the aquifer falls under the 2015 Spokane River and aquifer rule. Water suppliers are the first choice for new uses; if one can't serve your parcel in a timely and reasonable way, a permit-exempt well needs mitigation, which Ecology's SVRP Aquifer Bank provides free of charge for a single home (Ecology publication 15-11-011).
- Water from the Little Spokane River, its tributaries or the shallow aquifer that isn't part of the main aquifer falls under the Little Spokane rule. For a new home on a new permit-exempt well, that means an annual average of 3,000 gallons a day and a $500 fee that Spokane County collects with the building permit (RCW 90.94.020).
About 97% of the well reports around Mead are in the Little Spokane watershed. The building department checks whether your parcel is inside the aquifer boundary when you apply for a permit, and Spokane County's building permits and water supply page explains the options. Wells drilled before January 19, 2018 aren't affected by the 3,000-gallon limit.
Building Permit Water Requirements
Before a building permit is issued for a home on a private well in Spokane County, the Spokane Regional Health District reviews water adequacy: the well report, a pump test certification showing at least 1,440 gallons per day, and samples taken by an SRHD-approved sampler showing no coliform bacteria and nitrate no higher than 10 mg/L (SRHD water adequacy guide). We file the well report with Ecology within 30 days of finishing. How to read a well report.
Testing Your Water
Beyond the coliform and nitrate tests the permit requires, the health district notes that some wells in Spokane County have elevated uranium or arsenic, and the state Department of Health lists the county among those with elevated uranium in some groundwater. Testing for both once the well is in service is a good idea.
Planning Your Budget
Depth is the biggest factor in what a well costs, and around Mead the median runs from 155 feet east of town to 260 feet to the south. Our guide to the cost of drilling a well covers the rest. For a number specific to your property, send us the address or parcel number, and we'll check the nearby well reports and give you a free estimate.