Drilling a Well Around Spokane
The state has 1,015 water well reports for the area around Spokane, and 62 of them are for wells drilled since 2020. The median well is 175 feet deep, but the range is wide: half of the wells are between 100 and 310 feet, and one in ten goes deeper than 428 feet. Most of that spread comes down to geography. Spokane sits where three watersheds meet, and the wells in each one look different.
Three Watersheds, Three Kinds of Wells
- East of downtown, toward Spokane Valley (Middle Spokane watershed): the median well is 120 feet deep. This is aquifer country. The U.S. Geological Survey describes the Spokane Valley-Rathdrum Prairie aquifer as thick layers of coarse sediment laid down by a series of outburst floods, running west from Idaho to near Nine Mile Falls.
- South of the city (Hangman Creek watershed): the median is 180 feet, and water typically settles about 94 feet below the surface once the well is drilled. The Department of Ecology says groundwater from bedrock in this watershed is "very limited" and that "many areas are in decline."
- West and northwest, toward the West Plains (Lower Spokane watershed): the deepest wells around Spokane, with a median of 300 feet. Northwest of downtown, the median is 387 feet.
Those are medians for broad areas, and neighboring properties can still differ. Before we give you an estimate, we look up the well reports filed for the properties closest to yours. (Sources: USGS SIR 2007-5041; Ecology's WRIA 56 water availability summary.)
Water Rules Around Spokane
- Household wells: under RCW 90.44.050, a well can supply up to 5,000 gallons a day for household use, plus watering up to half an acre of lawn or noncommercial garden, without a water right permit.
- Over the aquifer: since 2015, a state rule (WAC 173-557) makes water suppliers the first choice for new uses of the Spokane Valley-Rathdrum Prairie aquifer. Ecology notes that "the majority of the region is served by existing municipal water suppliers." If a supplier can't serve your parcel in a timely and reasonable way, you can use a permit-exempt well, with mitigation that Ecology's SVRP Aquifer Bank provides free of charge (Ecology publication 15-11-011).
- South and west of the city: outside the aquifer, the Hangman and Lower Spokane watersheds have no extra streamflow fee or daily limit on a new home's well. Those apply in the Little Spokane watershed north of Spokane, around Mead and Colbert.
Spokane County confirms which rules apply to your parcel when you apply for the building permit. Its building permits and water supply page covers the aquifer boundary and the options.
PFAS on the West Side
On the West Plains, west of the Spokane River toward Spokane International Airport and Fairchild Air Force Base, PFAS has been found in groundwater. Ecology's April 2025 drilling advisory for the West Plains says drilling there "is not prohibited," but property owners and drillers should be aware that PFAS may be present in new or existing wells, and drillers must keep the natural barriers between aquifers intact (Ecology's advisory). Homes in the airport's interim action area or Fairchild's monitoring area can have their well water sampled at no cost.
Building Permit Water Requirements
Before a building permit is issued for a home on a private well in Spokane County, the Spokane Regional Health District reviews water adequacy: the well report, a pump test certification showing at least 1,440 gallons per day, and samples taken by an SRHD-approved sampler showing no coliform bacteria and nitrate no higher than 10 mg/L (SRHD water adequacy guide). We file the well report with Ecology within 30 days of finishing. How to read a well report.
Testing Your Water
Start with the coliform and nitrate tests the permit requires. The health district notes that some wells in the county have elevated uranium or arsenic, so those are worth testing once the well is in service, and on the west side, so is PFAS.
Planning Your Budget
Depth is the biggest factor in what a well costs, and around Spokane the difference between a 120-foot well on the east side and a 300-foot well on the west side is a big one. Our guide to the cost of drilling a well covers the rest. For a number specific to your property, send us the address or parcel number, and we'll check the nearby well reports and give you a free estimate.