Skip to main content

Water Well Drilling in Mica, WA

Mica sits south of Spokane Valley, about 32 miles from our base in Reardan. Wells here run deeper than anywhere else in Spokane County, so what the nearby records show matters more than usual. Here's what the state's well reports say and what to know before you drill.

Simplified drawing of the ground and a typical well Ground around Mica: The ground changes across the area: sediment in some places, rock close to the surface in others. A typical well reaches 400 feet. Surface 100 ft 200 ft 300 ft 400 ft 500 ft Typical well 400 ft Half of wells 200–560 ft Water fills to 95 ft Water fills to Unknown
A typical well around Mica It's 400 ft deep. Water fills the well up to about 95 ft below the ground (the blue). Half the wells here are 200 to 560 ft deep, shown by the bracket. Based on state well records.

Well data for Mica

From 738 water well reports filed with the Washington State Department of Ecology.

Median well depth
400 ft
Half are 200–560 ft deep
Water well reports
738
62 drilled since 2020
Median depth to water
95 ft
Static water level at completion
Median well yield
9 gpm
Gallons per minute at completion
How deep wells run around Mica
  • Under 100 ft 7% of wells (53)
  • 100–199 ft 16% of wells (116)
  • 200–299 ft 14% of wells (100)
  • 300–399 ft 12% of wells (89)
  • 400–599 ft 28% of wells (202)
  • 600 ft or more 23% of wells (163)

Wells drilled since 2015 have a median depth of 480 ft, deeper than the 340 ft median for wells drilled before 2000.

Source: Washington State Department of Ecology well reports, records through February 2025. Counts wells closer to Mica than to any other community we track, within 10 miles. Depths, water levels and yields are as the drillers reported them (112 reports list a water level and 140 list a yield). Report locations are accurate to about 40 acres. These figures describe the area, not your property: we check the reports nearest your site before we quote.

The Deepest Wells in Spokane County

The state has 738 water well reports for the area around Mica, and 62 of them are for wells drilled since 2020. The median well is 400 feet deep, the deepest of any Spokane County community we track, compared with 200 feet for the county as a whole. Half of the wells are between 200 and 560 feet, about 23% go deeper than 600 feet, and one in ten passes 700 feet.

Yields are modest, too. The median tested yield is 9 gallons per minute, compared with 13 for the county, and water typically settles about 95 feet below the surface.

How Depths Change Around Mica

About 71% of the well reports are north of town. Northeast of town the median well is 465 feet deep, with water about 100 feet down and a median yield of 7 gallons per minute. Northwest of town the median is 343 feet, with water about 130 feet down and a median yield of 10 gallons per minute. Due north, it's 384 feet.

Southeast of town is deeper still, with a median of 585 feet. West and south of town, fewer wells have been drilled and they're much shallower, with medians of 180 and 240 feet. Newer wells to the north have gone deeper: since 2015, the median is 530 feet northeast of town and 480 feet northwest, where 61 of the 114 reports filed since then were drilled.

Beyond the Valley Aquifer

Mica is south of the Spokane Valley, beyond the edge of the Spokane Valley-Rathdrum Prairie aquifer on the U.S. Geological Survey's map, so the aquifer rule that governs new wells in Spokane Valley generally doesn't come into play here. Ecology's summary for the Middle Spokane watershed, which takes in most of the Mica area, says the availability of groundwater from bedrock there is "very limited by climate and geology" (Ecology's WRIA 57 summary).

About 72% of the well reports around Mica are in the Middle Spokane watershed (WRIA 57) and about 28% in the Hangman Creek watershed (WRIA 56). Neither falls under the 2018 streamflow law's fee and 3,000-gallon limit, so a household well can supply up to 5,000 gallons a day, plus watering up to half an acre of lawn or noncommercial garden, without a water right (RCW 90.44.050). Ecology says most of the water in both watersheds is already legally spoken for, so larger uses that need a water right are hard to supply.

Building Permit Water Requirements

Before a building permit is issued for a home on a private well in Spokane County, the Spokane Regional Health District reviews water adequacy: the well report, a pump test certification showing at least 1,440 gallons per day (one gallon per minute), and samples taken by an SRHD-approved sampler showing no coliform bacteria and nitrate no higher than 10 mg/L (SRHD water adequacy guide). The health district also notes that some wells in the county have elevated uranium or arsenic, so those are worth testing once the well is in service.

Planning Your Budget

Depth is the biggest factor in what a well costs, and around Mica one well in four goes deeper than 560 feet, so it pays to look closely at the reports near your property. Our guide to the cost of drilling a well covers the rest. We also drill around Valleyford, about 2 miles away. For a number specific to your property, send us the address or parcel number, and we'll check the nearby well reports and give you a free estimate.

Questions about well drilling around Mica

How deep are wells around Mica?
Does it matter where around Mica I build?
Does the Spokane Valley aquifer rule apply near Mica?
How soon can you drill a well near Mica?